Automatic Infrared Soldering Station KADA 862D++ 4in1 with IR heating

KADA 862D+ + 4 in 1 Automatic IRDA Infrared Soldering Station for BGA Welding, Upper Infrared Heating, Lower Preheating, Hot Air Gun, Soldering Iron

 Features:

1. Infrared rays adopting independence development dismantle soldering technique
2. Certain targets infrared rays are heated, the penetration force is strong, the device suffers from caloric content, breaking the traditional hot breeze
Dismantle the soldering iron housing, in which the heating module is located, has a strong defect when bombarded with calories.
3. The operation is simple, it is necessary to make a day so that the training immediately completes all the modules.
4. No need to disassemble the soldering device, this machine can disassemble all modules.
5. This machine has a preheating system, the preheating range is 120*120mm.
6. Infrared rays do not heat up a single calorie romantic movement, can not affect a small module in the peripheral. Applicatively, everything is a module, is a micro BGA module especially.
7. Infrared rays are heated, disassembles the flat breeze of specific heat in soldering ROBS quickly double, due to the fact that it loses the speed of the device to reduce consumption.
8. Fully functional LED display.
9. The whole function depends on CPU management.
 
Parameters:
1. Power supply voltage: 220V AC
2. Power consumption: 1200W (max.)
3. Pump: Air gun motor
4. Preheating area: 120*120mm (max.)
5. Iron tip leakage voltage: <0.5mV
6. Standard iron tip: AT-900M
7. Hot air temperature: 100 to 480C
8. Iron temperature: 200 to 480C
9. Weight: about 11kg with packing
 
The package includes:
1. Super Kada 862D Soldering Station + +
2. Infrared ray device
3. Infrared device holder
4. Type B blower (motor)
5. Hot air gun holder
6. Soldering iron holder
7. Soldering iron
8. Foam for soldering iron
9. Includes 3 single nozzles